Music terms glossary: chords, keys, rhythm and stage terms
12 min read
Seeing “sus4” on a chord chart without knowing what it means, or hearing “back to the bridge” in rehearsal and not knowing where to come in: music terms are often used without anyone explaining them. This glossary collects the terms you hear most on stage and in rehearsal, grouped by topic. Where a topic is covered in more detail, the link is in the relevant entry.
Notes and sound
- Note — A single sound at a specific pitch. Western music uses 12 different notes; after them the same sequence repeats an octave higher.
- Note names: letters and solfège — The letters C, D, E, F, G, A, B correspond to the syllables Do, Re, Mi, Fa, Sol, La, Ti. Chord charts almost always use letters: C = Do, Am = A minor. That pairing is “fixed do”; in “movable do”, used in some teaching methods, Do is the first note of whatever key you are in.
- Octave — The distance from one note to the next note with the same name. The upper note vibrates at twice the frequency of the lower one.
- Semitone and whole tone — A semitone (half step) is the smallest step between two neighbouring notes; on a guitar it is one fret. A whole tone (whole step) is two semitones.
- Sharp and flat — A sharp raises a note by a semitone (C#), a flat lowers it by a semitone (Bb). In writing, # and b are used.
- Enharmonic — Two names for the same sound: C# and Db are the same key on a piano and the same fret on a guitar.
- Interval — The distance between two notes, named as a third, a fifth and so on. Intervals give chords and melodies their character.
- Scale — Notes arranged in a set pattern of intervals. The most common are the major and minor scales.
Chords
- Chord — Usually three or more notes played together; two-note power chords such as E5 are also called chords. How chord names are read is explained in the chord names guide.
- Root — The note that gives a chord its name: the root of a G chord is G.
- Major — A chord written with the letter alone: C, G, D. It usually sounds bright and open.
- Minor — An “m” is added to the letter: Am, Em. It carries a darker, sadder colour.
- Dominant seventh (7) — A minor seventh is added on top of a major chord: G7 = G, B, D, F. It sounds tense and wants to move to the next chord. A plain “7” always means this chord; the minor seventh is written m7 (Am7), the major seventh maj7.
- Major seventh (maj7) — A major seventh above the root is added: Cmaj7. A soft colour heard a lot in jazz and bossa nova.
- sus2 and sus4 (suspended) — The chord’s third is replaced by a second or a fourth: Dsus4. Neither major nor minor, it sounds unresolved and usually returns to the plain chord.
- add9 — A ninth (the second, an octave up) is added while the third stays: Cadd9.
- dim and aug (diminished, augmented) — Dim sounds tense and dark, aug sounds ambiguous; both mostly act as passing chords between two others.
- Slash chord — The note after the slash is the bass note: D/F# is a D chord played over F# in the bass.
- Barre chord — Pressing several strings at the same fret with one finger. Chords such as F and Bm are usually played as barre chords on guitar.
- Chord progression — The order in which chords follow each other in a song, for example C – G – Am – F.
Keys and transposition
- Key — The central note and scale a song revolves around: “The song is in G major.” How to find it is in the song key guide.
- Tonic — The central note of the key, the song’s “home”. Songs usually return to the tonic chord and often end on it.
- Relative minor — A major and a minor key that share the same notes: C major and A minor, G major and E minor.
- Transpose — Changing a song’s key by moving every chord by the same amount. Step by step: how to transpose chords.
- Capo — A clamp on the guitar neck that presses all strings at the same fret. It raises the key without changing your chord shapes; which fret gives which key is in the capo chart.
- Modulation — A key change in the middle of a song. A common example in pop repeats the last chorus a semitone or a whole tone higher.
- Vocal range — The span between the lowest and highest notes a voice can sing comfortably. The key is chosen to fit it: what key should I sing in.
- Nashville Number System — Writing chords as numbers for their position in the key instead of letters: 1 – 5 – 6m – 4. When the key changes, the chart stays the same: Nashville guide.
Rhythm and tempo
- Beat — The steady pulse of the music; what you tap with your foot along with a song.
- Tempo — The speed of a song.
- BPM (beats per minute) — The number of beats in a minute; tempo is measured this way. 60 BPM is one beat per second. How to find it is in the BPM guide.
- Metronome — A device or app that clicks steadily at a chosen tempo.
- Bar (measure) — Each of the equal groups the beats are divided into. On chord charts bars are usually separated by vertical lines.
- Time signature — Shows how many beats are in a bar and which note value gets the beat. 4/4 is the most common, 3/4 is waltz time. 6/8 is usually felt as two beats of three, which gives it its swaying feel.
- Syncopation — Accenting weak beats or the offbeats between them instead of the strong beats; it gives a rhythm tension and movement.
- Count-in — The count before a song starts that sets the tempo: “one, two, three, four”. It makes the whole band come in together.
- Strumming pattern — The repeating order of down and up strokes on the guitar strings.
Parts of a song
- Intro — The opening part of a song, usually before the vocals come in.
- Verse — The part whose lyrics change each time and move the story forward.
- Pre-chorus — A short part that builds tension between the verse and the chorus.
- Chorus — The part whose lyrics and melody repeat; the most memorable part of the song.
- Bridge — A part that usually comes once and adds a new colour with different chords.
- Interlude, solo — An interlude is an instrumental passage between sections. A solo is a part where one instrument or voice carries the melody alone, often improvised.
- Outro — The final part that closes the song.
- Repeat — A sign that a part is played again; on chord charts it is often written as “x2”.
Italian terms on sheet music: tempo and dynamics
On sheet music and chord charts, tempo and loudness are often written in Italian. These terms are the same in every language; learn them once and you can read them on any chart.
- Adagio — Slow and stately.
- Andante — At a walking pace, moderately slow.
- Moderato — At a moderate speed.
- Allegro — Fast and lively.
- Presto — Very fast.
- Ritardando (rit.) — Gradually slowing down. Most common at the end of a song, but it can close any section.
- Accelerando (accel.) — Gradually speeding up.
- A tempo — Return to the previous tempo after slowing down or speeding up.
- Fermata — The arc with a dot over a note: hold that note or rest freely. In a band, it is released on the leader’s cue.
- Piano (p) and forte (f) — Play soft and loud. A doubled letter strengthens it: pp very soft, ff very loud.
- Mezzo piano (mp) and mezzo forte (mf) — Moderately soft and moderately loud.
- Crescendo (cresc.) — Gradually getting louder. Also shown as an opening hairpin (<).
- Decrescendo, diminuendo (dim.) — Gradually getting softer; shown as a closing hairpin (>).
- Staccato — Detached: a dot over a note means it is played short.
- Legato — Smooth: the notes are joined without gaps between them.
- Da capo (D.C.) — Go back to the beginning.
- Dal segno (D.S.) — Go back to the sign (𝄋).
- Coda — The closing section of a song. “D.C. al coda” means go back to the beginning and jump to the coda at the marked place.
Instrument and tuning
- Tuning — Adjusting the strings to the right notes; also the set of notes the strings are tuned to. Step by step: how to tune a guitar.
- Standard tuning — On guitar, E A D G B E from the thickest string to the thinnest.
- Drop D — A tuning with the lowest string lowered to D, used for heavy, powerful chords.
- Tuner — A device or app that detects the note you play and shows whether it is in tune.
- Fret — The metal strips set into the guitar neck. “Third fret” also means the spot just behind the third strip where you press. Each fret raises the pitch by a semitone.
- Pick (plectrum) — A small, thin piece used to strike the strings.
- Fingerstyle — Playing the strings with the fingers instead of a pick; bass, chords and melody can sound at the same time.
- Tab (tablature) — A way of writing music that shows with numbers which fret to press on which string.
Stage and rehearsal
- Setlist — The ordered list of songs for a gig: how to build a setlist.
- Repertoire — All the songs a musician or band can play.
- Rehearsal — Working through the set before the show, alone or with the band.
- Soundcheck — Setting the levels of instruments and microphones before the gig.
- Monitor — A speaker facing the musician, or an in-ear monitor, so they can hear themselves and the band on stage.
- Chord chart — A page with the chords, often written above the lyrics, that shows the song’s structure. A lead sheet is different: it also has the melody in notation.
- Songbook — A binder or app that collects chord charts.
- ChordPro — A text format that writes chords inside the lyrics in square brackets: [G]One day... How to write it is in the ChordPro guide.
- Page turner pedal — A Bluetooth foot pedal that turns the page on a tablet.
Where these terms show up in Songlivo
- Key and transposing: with a song open, tap the target key and every chord is rewritten in the new key; the bass note of slash chords moves too. The capo is each player’s own choice.
- Chord types: in the Chords tab you can filter by type, such as maj7, sus4 or dim, and look at the diagrams.
- Tempo: the metronome runs from 30 to 300 BPM, and you can save the tempo you found to the song.
- Tuning: the built-in tuner takes you through the strings one by one in standard tuning.
- Setlist and stage: open your setlist on stage; in stage mode the song and key the leader picks reach the whole band’s screens at once, with no internet needed.
Songlivo keeps your songs and setlists on your device, moves chords to any key and brings the whole band to the same song in stage mode. To see these terms in practice, start with the guide to transposing chords.